using an Aeromotive fuel filter, you can attach the filter directly to the fuel pump utilizing an AN-16 to AN-12 reducer
fitting (Aeromotive P/N 15722) and one extra sealing o-ring (AN-12 o-ring pack Aeromotive P/N 15624) on the male
flare side.
7. Using AN-16 fuel line, connect the fuel pump outlet to a 10 micron post fuel filter (Aeromotive P/N 12364). You can
attach the filter directly to the fuel pump utilizing an AN-10 to ORB-16 fitting (Aeromotive P/N 15723) and an additional
sealing o-ring (AN-10 o-ring pack Aeromotive P/N 15623).
Make sure you use high pressure (150 psi minimum)
fuel line for this connection!
8. Connect the outlet filter to the vehicle’s fuel rails or pressure regulator depending on application as shown in the
following example diagrams, using AN-12 fuel line. For optimum fuel system performance in EFI applications,
Aeromotive recommends a balanced system with the fuel pressure regulator as the last component in the system.
Make sure you use high pressure (150 psi minimum) fuel line for this connection!
