Congratulations!
on your purchase of the Aeromic or Cyclemic - the leader in sweat resistant headmics
for group fitness instructors worldwide! With proper care and patience, your mic will last for years to
come.
Using your Aeromic/Cyclemic
They come pre-bent to be close to your mouth, allowing users to get more volume before feedback.
Do not bend is written on the yellow boom arm – for good reason! You are able to gently bend the boom
arm to position the capsule closer to your mouth, but constant, rough bending will result in damage. Put
the mic on, if it’s too far from your mouth, gently bend it closer.
The head frame may be gently molded to vary the size for narrower or larger heads by using constant
even pressure.
If you need to confirm that the Aeromic is working after you have turned on the transmitter and checked
that the mixer and sound system are all set to go then don’t blow in the microphone. A simple “test - one
- two” is all you need to say.
If you are connecting the headmic to a transmitter for the first time, locate the transmitter volume control
(gain) and turn it up to the maximum setting. Test the mic, if no sound is heard, check the receiver volume
or the mixer’s mic channel volume and increase until your voice is heard.
Please Note
- Because the Aeromic/Cyclemic is a sweat resistant professional grade microphone
designed for clear clean sound, you might experience some feedback (high pitch squeal) when changing
from another brand. There is nothing wrong with your micro- phone, but your system might need
adjusting to optimise the benefits of your Aeromic/Cyclemic.
Feedback
can be managed by:
Turning down the mic gain (MT or Mic Vol) on the body pack transmitter (usually located in the
battery compartment)
Turning down the mic volume on the mixer
Turning down the treble or bass on the mixer mic channel
Certain brands of mic systems include inexpensive low sensitivity headset microphones in their ‘fitness’
packages. In upgrading to the Aeromic/Cyclemic you will notice improved, cleaner and clearer sound from
the microphone system and you may have to make some system adjustments to optimize the sound
quality of the headset.
The use of an AEROMIX stereo mic/line mixer will help overcome this problem with its separate treble and
bass controls for microphones and music sources.
However, if feedback continues because of the room’s architecture (full of mirrors, windows, a polished
wood floor and brick upper walls) or your speaker type, then there is a selection of Feedback Suppression
devices or Graphic Equalisers. Consult your Aeromic supplier for more information on one that’s suitable
for you.
Содержание Cyclemic
Страница 1: ......
