Aerohive BR200-WP, Справочник по аппаратуре

Страница: 44 / 124

Chapter 4 The AP320 Platform
42 Aerohive
AP320 P
RODUCT
O
VERVIEW
The AP320 is a multi-channel wireless access point. It is compatible with IEEE 802.11b/g/n (2.4 GHz) and IEEE
802.11a/n (5 GHz) standards and supports a variety of Wi-Fi security protocols, including WPA (Wi-Fi
Protected Access) and WPA2.
You can see the hardware components on the AP320 in
Figure 1 . Each component is described in Table 1
"AP320 component descriptions" .
Figure 1 AP320 hardware components
Table 1 AP320 component descriptions
Component Description
Status LEDs The status LEDs convey operational states for system power, firmware,
Ethernet interfaces, and radios. See "Status LEDs" on page 44 .
ETH0 PoE port and ETH1 port The AP320 has two 10/100/1000-Mbps RJ45 Ethernet ports—ETH0 and ETH1.
See
"Ethernet Ports" on page 43 .
48VDC power connector The 48-volt DC power connector (0.625 amps) is one of two methods
through which you can power the AP320. To connect it to a 100 – 240-volt
AC power source, use the AC/DC power adaptor that is available as an
extra option. Because the AP320 does not have an on/off switch,
connecting it to a power source automatically powers on the device.
Console port You can access the CLI by making a serial connection to the RJ45 console
port. See "Console Port" on page 43 .
ETH0 ETH1 48VDC CONSOLE
Status LEDs
POWER
WLAN 0
WLAN 1
ETH 0
ETH 1
Mounting plate
Lock slot
Reset button