6/15/2020
AP410C Hardware User Guide
docs.aerohive.com/330000/docs/help/english/ng/Content/hardware/ap/ap410c.htm
16/18
Eth1: autosensing 10/100/1000G BASE-T/TX Mbps, requiring Cat5 or better cable.
Eth0: autosensing 100/1000/2500G BASE-T/TX Mbps, requiring Cat5 or better cable. The AP receives
power through an Ethernet connection to the ETH1 port from PSE (power sourcing equipment) that
is compatible with the 802.3at and 802.3at standards.
5.0 BLE
Antenna Gain
WiFi 2.4 GHz:
3.9
dBi gain max
WiFi 5 GHz:
4.7
dBi gain max
Antenna Plots
The antenna plots for the AP410C are available below. The Ethernet port location is noted on each chart.
AP410C
Antenna 1
Antenna 2
Antenna 3
Antenna 4
Antenna 5
Antenna 6
Antenna 7
Power and Environmental Specifications
Power Specifications
PoE input:
IEEE 802.3at (42.5 - 57.0V) with USB and full transmit power
IEEE 802.3af (37.0 - 57.0V) without USB and reduced transmit power
ESD Protection: 8 kV contact discharge / 15 kV air discharge
Power Profile
AP410C
802.3af
802.3at
2.4 G Radio
2x2 (14 dBm)
2x2 (18
dbm)
5 G Radio
3x3 (17 dBm)
4x4 (18
dBm)
Sensor Radio
2.4 G and 5 G (15 dBm)
2.4 G
and 5 G
(18
dBm)
BLE
Enabled
Enabled
USB
No
Yes
2.5 G Ethernet
Yes
Yes
1 G Ethernet
No
Yes
