6/15/2020
AP410C Hardware User Guide
docs.aerohive.com/330000/docs/help/english/ng/Content/hardware/ap/ap410c.htm
1/18
AP410C Hardware User Guide
Read about and view specifications and compliance information for the AP410C in this topic. Install the
AP410C using this topic.
The AP410C is a high-performance 802.11ax 5G dual band access point designed for indoor high-density
environments. This device supports IEEE 802.11ax Orthogonal Frequency-Division Multiple Access (OFDMA)
multi-user access.
For regulatory and compliance information, see
"Regulatory Compliance Statements"
.
Important! Change the Country Code
If your access point is configured for the World Regulatory Domain, it is important to set the country
code to the country in which the AP will be deployed to meet regulatory requirements and for optimal
wireless operation. To do this, follow these steps:
The country code selection is for World models only and is not available to FCC, CAN, and
other country-specific models. Per FCC regulations, all Wi-Fi products marketed in the United
States must be set to U.S. channels only.
1. Power on the AP and allow it to find and connect to ExtremeCloud IQ. Once the AP is connected
it appears in the table of devices on the Manage > Devices page.
2. Select the check box next to the AP, and then choose Assign Country Code from the Actions
drop-down list. In the dialog box, select the appropriate country from the drop-down list, and
then click Save.
3. Upload your changes to the device.
Safety Guidelines
Safety Guidelines
Install the AP
You can mount the AP410C on a flat surface or wall, or on the rails of a standard dropped ceiling grid. There
is also an accessory mounting bracket that allows you to install the device in Armstrong-style dropped
ceilings (ordered separately).
The following sections describe how to install your AP410C devices.
Shipping Carton Contents
