Aerohive Networks HIVEMANAGER AH-HM-1U-NR, Инструкции по увеличению объема памяти, Страница: 2 / 3

H
IVE
M
ANAGER
A
PPLIANCE
M
EMORY
U
PGRADE
I
NSTRUCTIONS
2 Aerohive
Figure 1 Remove the cover screws and the chassis cover.
5. Locate the four memory slots (see Figure 2 ).
Figure 2 Memory slot location in the HiveManager appliance
6. Install the new memory card in the slot farthest from the existing cards, as shown in Figure 3 . Do not
remove installed cards.
7. Rotate the handles on each end of the slot outward.
8. Push the new memory card firmly into the memory slot. When it is secure, rotate the tabs toward the
card until they click into place.
Remove the rack
mount brackets from
the front panel.
Remove the three cover
screws from each side
of the device.
Slide the cover back
from the front panel
until the lip of the
cover clears the
chassis,
then lift
the cover
off of the
chassis.
1
3
2
Front of chassis Rear of chassis
Install new memory
card in this slot
Original memory card
(do not remove)
In some older
chassis the large
fan is protected by
an enclosure.