2
AP141 5-GHz Directional Antenna Installation Guide
H
ARDWARE
S
PECIFICATIONS
This section describes the specifications for the 5-GHz directional antenna.
Device and Enclosure Specifications
•
Frequency range: 5.150-5.875 GHz
•
Bandwidth: 700 MHz
•
Gain: 2x 5 dBi
•
Polarization: Dual slant +|- 45°
•
Width and height: 7.9" (200 mm), depth: 1.25" (33 mm)
•
Weight: 8.36 oz (260 gr)
•
Input power, maximum: 20 Watts
•
Input impedance: 50 Ohms
•
Operating temperature: -40° to 158° F (-40° to 70° C)
•
Humidity: ETS 300 019-1-4, EN 302 085 (annex A.1.1)
•
Environmental compliance: UL94
M
OUNTING
THE
AP141 5-GH
Z
D
IRECTIONAL
A
NTENNA
To provide unobstructed RF coverage, mount the AP141 antenna so that it has at least a three-foot
(one-meter) clearance from any nearby obstructions. For best coverage, these antennas are typically
installed in pairs, directly facing each other, and with no obstructions between them.
After checking that you have all the materials and tools necessary, and familiarizing yourself with the safety
and hazard warnings, you are ready to install the antenna. The following illustration shows the front and back
panels of the antenna, the cables, and the mounting hardware. The installation steps are described below.
POLARIZAT O
POLARIZAT O
AP141 5 GHz antenna, front view Rear view
