RN200 Mono Software User Manual
44
3.5.5.2 Test Process
After setting all the parameters correctly, select the test function and click the "Start" button
to execute the test. All test data will be displayed in real time the 2D graph during the test, as
shown in Figure 39.
The 5G NR test has two modes: Single and Continuous. In “Continuous” mode, the test will
not stop, and the test result will be auto refreshed. In “Single” mode, the test will be
executed once. After the test is finished, the user can click the “Single” button to trigger
another round of tests.
During the test, the user can modify the parameters at any time in order to view the test
data and obtain the correct results.
Figure 39: 5G NR Test
