RN200 Mono Software User Manual
40
When the “State” button is checked, the trace will be displayed in the 2D graph.
3.5.3.4 Marker settings
Click the "Marker" button under the “Parameter” menu to show marker setting window, as
shown in Figure 37. A maximum of 20 markers can be set and displayed in a 2D graph.
Figure 37: Marker Setting
Parameter Name
Definition
Marker To Trace
Specify a trace to place the marker
Marker Type
Norm: without data comparison
Delta: perform data comparison and “Delta to” will be valid.
Delta To
Specify a marked to be compared with
State
When “State” button is checked, the corresponding marker will be displayed in
the 2D graph
Table 12: Marker Parameters
