RN200 Mono Software User Manual
38
3.5.3.2 Test Process
After setting all the parameters correctly, click the "Start" button to perform the test. The
test data will be displayed in a 2D graph in real-time during the test, as shown in Figure 35.
Figure 35: Data Display
The spectrum test has two modes: Single and Continuous. In “Continuous” mode, the test
will not stop, and the test result will be auto refreshed. In “Single” mode, the test will be
executed once. After the test is finished, the user can click the “Single” button to trigger
another round of tests.
During the test, the user can modify the parameters at any time, in order to view the test
data and obtain the correct results.
