Replace
Bulbs
24-Hour
Light
Add
Nutrients
Add
Nutrients
Replace
Bulbs
Locking Lever
Basic Reminders About Your AeroGarden
(continued
)
As plants grow to 1-2” from lights, raise the
Lamp Arm
one notch at
a time. Be sure
Lamp Arm
is set at the lowest setting when you start
your AeroGarden
.
Unplug Space•Saver 6 and remove
Bowl
from
Base
.
Hold
Lamp Arm
where it connects to
Lamp Hood
with one hand.
With other hand, push in
Locking Lever.
Release
Locking Lever
while pulling up on
Lamp Arm.
Locking Lever
will automatically click into next notch in
Lamp Arm.
Replace Bowl
on
Base
and plug in Space•Saver 6.
note: When lowering
Lamp Hood,
be sure to hold
Lamp Arm
to avoid crushing plants.
1
2
3
4
Raise Lamp Hood
(lights)
When “Replace Bulbs” light on
control Panel
begins to
blink after 6 months of use…
• Unplug Space•Saver 6.
• Remove old
Grow Bulbs
and carefully discard*.
IMPorTAnT: To avoid burning, be sure
Grow Bulbs
are cool before handling.
• Insert new
Grow Bulbs
into
Lamp Hood
.
• Plug in Space•Saver 6 and press and release “Reset”
button to restart grow bulb timer.
Early
Grow Bulb
Replacement
If you replace
Grow Bulbs
before “Replace Bulbs” light illuminates, be sure to
restart grow bulb timer as follows:
• Press and hold “Lights” button until white light next to your selected plant
type starts blinking – about 5 seconds.
• Release “Lights” button. Plant type selected light will continue to blink for
about 9 seconds. While plant light is still blinking…
• Quickly press and release “Reset” button. “Replace Bulbs” light will blink
once and plant selected light will stop blinking.
Replace
Grow Bulbs –
order replacement bulbs at www.aerogardensupport.com
Space•Saver 6 Elite
control Panel
Space•Saver 6
control Panel
*Check with local recycling authorities for light
bulb recycling availability in your area.
12
