When using this AeroGarden electrical furnishing, basic precautions should always be followed,
including the following:
Read all instructions before using this AeroGarden furnishing. SAVE THESE INSTRUCTIONS
1. To reduce the risk of electric shock, the AeroGarden Farm has a specific plug.
Do not change the plug in any way.
DANGER
– to reduce risk of electric shock:
2. Always unplug the AeroGarden Farm from electrical outlet before cleaning.
WARNING
– to reduce risk of burns, fire,
electric shock, or injury to persons:
3. Unplug AeroGarden Farm from outlet before putting on or taking off parts.
4. Use AeroGarden Farm only for its intended use as described in the instructions. Do not use attachments not
recommended by manufacturer.
5. Never operate AeroGarden if it has a damaged cord or plug, if it is not working properly, if it has been dropped
and damaged, or if it has been dropped in water. If any of these conditions occur/exist, contact customer
service.
6. Keep cord away from heated surfaces.
7. Never operate furnishing with air openings blocked. Keep air openings free of lint, hair, and the like.
8. Never drop or insert any object into any electrical openings.
9. Do not use outdoors.
10. Do not operate where aerosol (spray) products are being used or where oxygen is being administered.
11. Do not touch moving parts or hot parts such as pumps, lights, reflective surfaces, and the like.
12. To disconnect, remove plug from outlet.
13. Do not place or submerge base, cord, plug, or Light Hood in water or other liquid to clean it.
14. Do not allow water to contact hot LED Grow Lights.
15. Use only approved and supplied parts and accessories. Use only AeroGarden LED Grow Lights with this AeroGarden
model. Use of any other kind of accessory is not recommended.
16. Do not use AeroGarden for other than intended purpose.
17. This product is intended for household and residential use only. This product is not approved for commercial
applications.
18. If supply cord is damaged, it must be replaced by manufacturer, its service agent, or similarly qualified technician
in order to avoid a hazard.
19. Electrical wiring must be in accordance with local regulations.
20. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction
concerning use of appliance by a person responsible for their safety.
21. Children should be supervised to ensure they do not play with the appliance.
IMPORTANT SAFETY INSTRUCTIONS
Warning:
Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
—Increase the separation between the equipment and receiver.
—Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may
cause undesired operation. The device has been evaluated to meet general RF exposure requirement.
This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. This device complies with Industry Canada’s license-exempt RSSs. Operation is subject to the following two conditions: (1) This
device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : (1) l’appareil ne doit pas produire de brouillage, et; (2) l’utilisateur de
l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.
AeroGarden Farm 12 Model Number: 100022 - BLK / WHT
AeroGarden Farm 12 XL Model Number: 100023- BLK / WHT
AeroGrow International, Inc.,
P.O. Box 18450, Boulder, CO 80308-1450
