1 |
P a g e
40 Huntingwood Drive Huntingwood NSW 2148
Phone: (02) 8825 1999 Website:
AEROFLOW PERFORMANCE
TRANSMISSION SHIFTER CABLE
WARNING!
THIS PRODUCT REQUIRES DETAILED KNOWLEDGE OF AUTOMOTIVE SYSTEMS. WE RECOMMEND THAT THIS INSTALLATION BE
CARRIED OUT BY A QUALIFIED AUTOMOTIVE TECHNICIAN.
INTRODUCTION
Congratulations on your purchase of Aeroflow Performance transmission shifter cable. Aeroflow Performance products cannot and will not be
responsible for any damage, or other conditions resulting from misapplication of the parts described herein. However, it is our intention to
provide the best possible products for our customer, products that perform properly and satisfy your expectations. Should you have any
questions? Please call technical support at +61 2 8825 1900 and have the product part number on hand when calling.
This Aeroflow Performance hard-core heavy-duty Race 5 Foot shifter cable
is the must have cable weather it’s a street
car or a race car. With a
large 9.52mm (
3/8”
) outer diameter cable housing that is pre-lubed with HPRE oil for smooth operation. They are designed with enough
clearance to
reduce backlash with a 9.52mm (.375”) ‘long
-l
ay’ outer jacket for durability
which is less-likely to kink during operation. The cable
features an eyelet at one end to connect to the shifter, a 10-32 threaded end at the transmission side of the cable with rotary swaged ends.
This is the standard cable supplied with the Aeroflow Nitro and Pistol and some B&M shifters.
This cable is measured from end to end at 5 foot. Please ensure that this is the correct length for your application. Do not let cable kink
anywhere along its length, if it is kinked it will not operate the transmission correctly. Cable should be kept straight for 2 inches on either end
of cable to ensure correct operation. If this is not followed it will cause damage to all components associated to the shifter cable including
transmission.
For more information or technical enquires
Contact: Aeroflow Performance on
