Model 8310
IM-289A
Aeroflex / Weinschel
8
2. SPECIFICATIONS:
2-1. GENERAL SPECIFICATIONS:
Input Power Requirements
ac 100 to 240 Vac, 50/60 Hz, 50 Watts
Environmental
Operating Temperature
0 to +50°C
Storage Temperature:
67° to +167 °F (-55° to +75°C)
Humidity:
96%
Altitude:
40,000' (12,192M)
IEEE-488 Bus
(1)
Connector:
24-pin per IEEE-488.1
Protocols:
per IEEE-488.2
Indicators:
Remote (RMT), Listen (LSN), Talk (TLK), SRQ (SRQ)
RS-232 Bus
(2)
Connector:
9-pin male D
Signals: TXD, RXD, RTS, CTS, DTR, GND
Baud Rates:
2400, 9600, 19200, and 38400
Data Bits:
8
Handshaking:
None, RTS/CTS, XON/XOFF
Parity:
None, Odd, Even
Indicators:
Tx (Transmit) and Rx (Receive)
RS-422 Bus
(3)
RS-485 Bus
(4)
Connector:
9-pin male D
Signals: TXD+, TDX-, RXD+, RTX-, RTS+, RTS-, CTS+, CTS-,
and
signal
GND
Baud Rates:
2400, 9600, 19200, and 38400
Data Bits:
8
Handshaking:
None, RTS/CTS, XON/XOFF
Parity:
None, Odd, Even
Indicators:
Tx (Transmit) and Rx (Receive)
RF Characteristics
(5)
See Model Configuration Tables (pg 9-10)
NOTES:
1. GPIB/IEEE-488 model allows user-selectable addresses.
2. RS-232 can be used with standard PC serial port for short and medium distances (up to approximately 50 ft).
3. RS-422: designed for very long distance communications (4000 ft) and & optimized as a single node protocol, typically with one device
connected to a single port.
4. RS-485: designed for very long distance communications (4000 ft) & optimized for multi-drop connections that can used to create a
low cost network.
5. Refer to Individual data sheet (Appendix C) for detailed specifications on internal programmable attenuators.
2-2. PHYSICAL DIMENSIONS:
NOTE: All dimensions are given in mm (inches) and are maximum, unless otherwise
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com