28
GR-LEON4-ITX Development Board
Quick Start Guide
Compression Ratio: 3.035
section: .vmlinux at 0x40004000, size 2658560 bytes
Uncoded stream length: 2658560 bytes
Coded stream length: 1562710 bytes
Compression Ratio: 1.701
creating LEON3 boot prom: prom.out
Searching for compiler to use (sparc-elf, sparc-rtems or sparc-linux):
sparc-elf-gcc (GCC) 3.4.4
Copyright (C) 2004 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
sparc-elf-gcc
-O2
-g
-N
-T/opt/mkprom2/linkprom
-Ttext=0x0
/opt/mkprom2/promcore.o
/opt/mkprom2/promcrt0.o
/opt/mkprom2/promload.o
/opt/mkprom2/promdecomp.o
-nostdlib
/opt/mkprom2/prominit.o
/opt/mkprom2/prominit_leon3.o /opt/mkprom2/prombdinit.o
dump.s bdinit.o
-o
prom.out
multidir:
jan@jan:~/Linux$
The SPI Flash memory device can now be programmed with the PROM contents in the
prom.out file generated by MKPROM2 (it is recommended to use the Ethernet debug link
when programming the flash), start GRMON and issue the following commands:
grlib> spim flash detect
Got manufacturer ID 0x20 and Device ID 0x2017
No device match for READ ID instruction, trying RES instruction..
Found matching device: ST/Numonyx M25P64
grlib> spim flash load prom.out
section: .text at 0x0, size 1575824 bytes
section: .data at 0x180b90, size 32 bytes
total size: 1575856 bytes (119.3 kbit/s)
read 131 symbols
entry point: 0x00000000
The flash contents can now also be verified, either by
spim flash verify prom.out
or by the
faster
verify prom.out
:
grlib> verify prom.out
section: .text at 0x0, size 1575824 bytes
section: .data at 0x180b90, size 32 bytes
total size: 1575856 bytes (12.0 Mbit/s)
entry point: 0x00000000
grlib>
The PROM has now been successfully programmed. The software located in PROM can
now be booted by power cycling the board or by pushing the reset button.
U-boot
U-Boot (Das Universal Boot loader) is boot loader for embedded systems developed by
http://www.denx.de
and a port exists for SPARC/LEON. The LEON U-Boot can boot
RTEMS, VxWorks and Linux 2.6. Building the u-boot boot loader can be done with the
sparc-elf-gcc (BCC) crosscompiler.
The GR-LEON4-ITX data package contains a pre-built U-Boot image with a configuration
suitable for the board. The image is available in different formats in the directory
gr-l4itx-
© Aeroflex Gaisler AB
June 2010, Rev. 0.2
