4
Rev 1 June 20/2017
www.aeroex.com
Installation:
•
Mount mist collector level.
•
Units can be mounted directly on top of machines, on a post or on the wall.
•
Ensure that there is free space to change filters.
•
Minimize the length of ducting to avoid air flow loses.
•
Metal ducting or flexible hose can be used.
•
Do not locate suction intake on machining applications in direct line of the cutting spray.
•
Install chip strainer.
See details next page
•
Connect the oil drain line using loop in hose or pee trap.
•
Loop in hose must be minimum 8” below mist collector, no max.
See instructions page 5
.
•
Fill loop with water or oil to create air lock.
•
Install motor starter and set overloads.
•
Connect electrical power.
•
Check motor direction as per arrow on motor.
Typical installation: