AEROCOMPACT CompactPITCH XM-P, Руководство по сборке

Страница: 18 / 24

X
M
-P
Assembly
www.aerocompact.com 18
Attach each of the cross connectors with the upper rail to the lower rail.
Make sure that the cross connector is fully clicked into place.
Tighten the Allen screw
on each of the cross connectors to 15 Nm or 11 ft-lb.
Mounting the microinverter with a T-Bolt Assembly (MA-RA)
The microinverter can be installed on the rail below the module.
Attach the T-Bolt Assembly to the rail.
Hand-tighten the bolt .
Installing modules
Do not enter the modules under any circumstances.
Tip: When installing, wire the modules at the same time.
The cables can be attached to the module with the cable tie clip (CLP-M).
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+