S1
0
p
lu
s
Assembly
www.aerocompact.com
19
Install remaining modules row by row as described.
Tighten all end-clamps and mid-clamps to 15 Nm or 11 ft lbs.
Reposition / replace clamps
Demount clamp: Unscrew the screw at the clamp completely.
Depending on the mounting situation, squeeze the clamp laterally and pull it out or pull it laterally out of
the rail.
Installing modules with alpine supports (optional)
Above a certain snow load, additional support brackets (alpine brackets) are required at the middle of the
module frame. The planning documents will state whether alpine supports are required.
Before installing the alpine supports, make sure that the modules are suitable for the increased snow
load and that clamping at the additional locations is approved.
Attach end-clamps to the front alpine supports
, the additional center supports
and connector brack-
ets
.
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
