Initializing the PKLR2400 Radio
Preliminary
39
8. Initializing the PKLR2400 Radio
Following is an example of the initialization sequence for both the Client and Server Radios
following AeroComm or customer configuration of the EEPROM configuration parameters. This occurs
only in the API Serial Interface Mode 03.
Client Radio
Server Radio
Apply Power
Wait for CTS logic low (if 5V)
Host issues
RF enable
command
Host awaits Acknowledge
Host reads EEPROM for IEEE
source address
Await Server Radio Beacon with
IEEE Server Radio address
Issue Server Radio beacon every
5ms – 500ms with IEEE Server
Radio address
Client Radio issues
In range
command to Host with Server
Radio address
Server Radio can now transmit or
receive data
Client Radio can now transmit or
receive data
