ConnexModem & ConnexPC User’s Manual
8. You are now ready to configure the new modem. Select
“Standard 56000 bps K56Flex
Modem”
and then click
Properties
.
9. On
the
General
tab, select the port that is connected to the ConnexLink unit. Select
115200
for the Maximum speed. Do not select
“Only connect at this speed”
, as this
will not allow communications from the ConnexLink unit to the ConnexModem unit. The
selected Baud Rate must match the ConnexLink’s Baud Rate setting.
10. Click the
Connection
tab. Select
8
Data bits,
None
for Parity,
1
for Stop bits. Select
“Wait for dial tone before dialing”
. Selecting
“Cancel the call if not connected
within xx secs”
is optional.
5/25/2004
8
