2
Caution:
Air temperature and weather do affect the air pressure in inflatable products. In
cold weather your airbed will lose some pressure due to the fact that the air will contract.
If this occurs, you may want to add a little air to improve your airbed’s performance.
However, in hot weather, the air will expand. You must let some air out to prevent the
airbed from failing due to overpressure.
You should avoid exposing your airbed to extreme temperature (hot or cold).
•
Do not let inflatable products come in contact with sharp,
pointed objects that may puncture the plastic material.
•
This mattress is not intended for infants or persons with
limited mobility. They may roll off of the mattress and
become entrapped between the mattress and a wall.
•
Product is intended for use as an indoor bed only. Do not step
or jump on bed or use as a trampoline. Bed may puncture.
•
Place bed in a safe area before use, making sure that there are
no sharp edges, steps, drops, or breakable items nearby. Use
on flat surfaces only. Bed may tip over on uneven surfaces.
•
This bed is made of plastic and therefore may melt or burn if it
comes in contact with any flame or heat source. Do not place
it near or against heaters, open flame or other hot objects.
•
This is not a water toy. Use as a mattress only.
Pump
•
Adult supervision is required for inflation, deflation and
maintenance. Follow all safety instructions to avoid
serious injury.
•
This is an electrical product - not a toy. To avoid risk of fire,
burns, injury, and shock, it should not be played with or
placed where small children can reach it. Do not use in or
around water.
•
This appliance is not intended for use by persons (including
children) with reduced physical,sensory or mental
capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning
use of the appliance by a person responsible for their safety.
•
Children should be supervised to ensure that they do not
play with the appliance.
•
If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified persons
in order to avoid a hazard.
WARNING