SERVICE PARTS
* Blower Assembly includes part 5, 4, d, 3, c, b, a.
Replacement installation: a
Remove the screw (part c), then take out the motor plate (part 3) from
the housing (part 9) by pushing down the rib in the plate while pulling
out on the side of the housing. Replace the broken parts.
WARNING: Before replacing, be sure to turn off power at power source.
WARRANTY
This warranty covers all defects in workmanship or materials for:
The mechanical and electrical parts contained in this product for a period of 72 months from the date of purchase. You must keep
and be able to provide your original sales receipt as proof of date of purchase. This warranty is covered to the original retail
purchaser of this product only. The manufacturer will replace any mechanical or electrical part that proves defective in normal
household use for a period of 72 months.
THIS WARRANTY DOES NOT COVER:
•
Damages from improper installation.
•
Damages from shipping.
•
Damages from misuse, abuse, accident, alteration, lack of proper care and maintenance.
•
Damages from service by persons other than a licensed electrician.
•
Does not cover any labor or transportation charges related to the repair of this product.
This warranty does not extend to fluorescent lamp starters and tubes.
THIS LIMITED WARRANTY IS GIVEN IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING THE
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
The remedy provided in this warranty is exclusive and is granted in lieu of all other remedies. This warranty does not cover incidental
or consequential damages. Some states do not allow the exclusion of incidental or consequential damages, so this limitation may not
apply to you.
Some states do not allow limitations on how long an implied warranty lasts, so this limitation may not apply to you. This warranty
gives you specific legal rights; you may also have other rights, which vary from state to state.
READ AND SAVE THESE INSTRUCTIONS
Installer: Leave this manual with the homeowner
4
PART
PART NAME
Qty.
1
Grille Assembly (includes part 2)
1
2
Grille Spring
2
3
Humidity sensor
(for AP904H-SL ,AP124H-SL)
1
4
Motor Plate
1
5
Motor
1
6
Blower Wheel
1
7
Wire Panel / Harness Assembly
3
8
Hanger Bar Kit (long)
1
9
Wiring plate
1
10
Housing
1
11
Damper / Duct Connector
1
a
Nut, Hex Lock
4
b
Washer
4
c
Screw
1
d
Isolator
4
e
Screw
1
