background image

SM321009D

Page 1 of 9

©Aero-Motive Nov-03

 1100M,  1200M, 1300M, 1400M

& 1500M Series Cable Reel

Service Manual

Aero-Motive Company

A Woodhead Industries, Inc. Subsidiary

Important Safety Instructions

Please read this manual carefully and follow its instructions.  Improper use or failure to follow these instructions could
result in serious injury, death or property damage.  Operators should be instructed in the safe and proper use and
maintenance of this product.  Keep this manual for future reference.

The following safety precautions call attention to potentially dangerous conditions.

DANGER:

Immediate hazards which WILL result in severe personal injury or death.

WARNING:

Hazards or unsafe practices which COULD result in 

severe

 personal injury or death.

CAUTION:

Hazards or unsafe practices which MAY result in 

minor

 personal injury or product or

property damage.

INSTALLATION

WARNING:

Lock out all electrical power and remove all spring tension from the reel before opening
any enclosure or performing any service to this reel.  Make sure all circuits carry
appropriate fuse protection. Hazards or unsafe practices COULD result in severe personal
injury or death.

WARNING:

Failure to read, understand, and follow these instructions creates hazards that COULD
result in personal injury or death.

CAUTION:

Instruct operators in the safe, proper use, and maintenance of the reel.  Keep this manual
for future reference. Hazards or unsafe practices MAY result in 

minor

 personal injury or

product or property damage.

MOUNTING

The fixed base of the reel allows mounting in several different positions
including base up, base down, or wall mounted.  Here are general mounting
requirements:

  Main-shaft must be horizontal.

  Centerline of the spool assembly must be on line with the cable run.

  When mounted overhead in base up position, add a secondary chain,

bracket or other safety device to prevent reel from falling in case the
mounting bolts are removed or become loosened from vibration.

SECONDARY SUPPORT CHAIN

DANGER:

A secondary safety cable or chain is to be attached to all reels mounted overhead to prevent
reel from falling.  Immediate hazards WILL result in severe personal injury or death.

All reels mounted over head should have a secondary support chain to protect personnel in case of
structure or mounting component failure.  Attach one end of secondary support chain or cable to
secondary support point on reel.  Attach other end of secondary support chain or cable to a support
component other than that which supports the reel.  The chain or cable should be as short as possible
allowing reel to drop no more than 6 to 12 inches if the primary connection is released.  A secondary
support is offered as an accessory item.

Содержание 1100M Series










Отзывы: