16
4.13 ABSENT SETTING
Absent on: Press FUNCTION under on state of the unit till the unit enters the Absent setting interface. Press SWING/ENTER to confirm the setting.
Absent off: When the Absent function is activated, press FUNCTION to enter the Absent setting interface. After that, press SWING/ENTER to cancel this function.
Note:
1.
This function is only available in heating mode.
2.
When this function has been set, set temperature is displayed in 8°C(46°F). In this case, temperature setting and fan speed setting are shielded.
3.
This function will be cancelled when switching modes.
4.
This function and sleep function cannot be on simultaneously. If Absent function is set firstly and then sleep/quiet function is set, Absent function will be cancelled while
sleep function will be valid, and vice versa.
Fig. 15: Absent Setting
Wi
Fi
Wi
Fi
Wi
Fi
Wi
Fi
Wi
Fi
Turn on the unit,without turning on absent
function
Press “FUNCTION” button into absent state
Press “SWING/ENTER” button to turn
on absent function
Press “FUNCTION” button into absent state
Press “SWING/ENTER” button to turn off
absent function
