AERMEC WLRC30, Руководство пользователя

Страница: 12 / 20

12
VIEW THE AMBIENT AIR, SET POINT OR OUTDOOR AIR
(IN THE DISPLAY OF THE INDOOR UNIT)
Through the use of the remote control it is possible to
display the room temperature value read by the indoor
unit, or display the current operating setpoint used
by the unit. This information is displayed on board the
indoor unit’s display.
If the unit is on and if the indoor unit display is enabled,
pressing the
FA
N
TU
R
BO
ON/OFF
MODE
I FEEL
T-ON/T-OFF
TEMP CLOCK
LIGHT
X-FAN SLEEP
key allows the display of the following
values on the indoor unit’s display (successive pressing
passes from one to the next):
ACTIVATING / DEACTIVATING THE TURBO FUNCTION
The unit allows the setting of three fan speeds during
the various operating modes (except the automatic
mode and the dehumidification mode). There is an
additional speed called turbo.
If the unit is on, pressing the
FAN
TURBO
ON/OFF
MODE
I FEEL
T-ON/T
-OFF
TEMP
CLOCK
LIGHT
X-F
AN
SLEEP
button activates
or deactivates this function. If the function is active the
icon
FA
N
TU
R
BO
ON/OFF
MODE
I FEEL
T-ON/T-OFF
TEMP CLOCK
LIGHT X-FAN SLEEP
is shown on the remote control’s display.
NOTE:
The default display on the indoor unit’s display
is the operating setpoint; the room temperature
value is displayed for 3 seconds after which
the display returns to the operating setpoint.
To display the room temperature again it is
necessary to select the corresponding symbol on
the remote control.
Display of room temperature
or operating setpoint of the
indoor unit
FA
N
TU
R
BO
ON/OFF
MODE
I FEEL
T-ON/T-OFF
TEMP
CLOCK
LIGHT WiFi SLEEP
FA
N
TU
R
BO
ON/OFF
MODE
I FEEL
T-ON/T-OFF
TEMP CLOCK
LIGHT WiFi SLEEP
Setting the
TURBO function
None
visualisation
Set
point
Ambient
air
Outdoor
air