48
GB
6795773_01
The VMF system can manage up to 12 pumps. The number
of VMF-CRP expansion boards to be installed in the system is
calculated automatically by the VMF-E5 application relating to
the actual number of pumps present, according to the relation:
- from 1 to 4 pumps= (x1) VMF-CRP;
- from 2 to 8 pumps= (x2) VMF-CRP;
- from 9 to 12 pumps= (x3) VMF-CRP.
In order to set this value it is necessary to:
(1) Enter modifi cation mode by pressing the
C
key; after this
key has been pressed, the number of pumps installed on the
system will be highlighted.
(2) Press the
A
or
B
key to modify the value.
(3) Press the
C
key to confi rm the value entered; once this
key has been pressed, the current setting will be highlighted
normally, thus indicating that the modifi cation procedure has
concluded.
After the data has been entered, it will be possible to:
- Pass on to the following window by pressing the
B
key.
- Go back to the previous window by pressing the
A
key.
- Press the
D
key to return to the selection of the menus.
• Set the number of pumps managed by the VMF system
The example system has 4 pumps,
therefore an additional VMF-CRP module
to manage the pumps has been included
in the design.
A
B
C
D
Numer of pumps
ESC
4
Содержание VMF-E5
Страница 1: ...VMF E5 6795773 _01 A5 Ver 3 1 6 GB INSTRUCTIONS FOR THE INSTALLER ...
Страница 51: ......
