AERMEC REMOTE HANDSET, Руководство пользователя

Страница: 12 / 20

12
The unit has a timer for programming unit switch-on at
a specified time.
If the TIMER button is pressed while the unit is
switched off, you will access timer programming mode
(the HOUR and ON icons underneath the time will start
flashing). Press or to set the required switch-on
time. By keeping the TIMER button pressed for about 2
seconds, the time will move quickly on the display and
you will reach the required time faster.
Press TIMER again to confirm the time and activate the
programming. If you want to cancel a programmed
switch-on, just press TIMER again to delete it.
NOTE
• The time setting gap is from 0.5 to 24 hours.
• When making two operations (TIMER ON and
TIMER OFF), the time gap between them (with
no keys pressed) must not be more than 5
seconds. Otherwise, the programmed ON or
OFF operation will be automatically annulled.
• Once a programmed switch-on has been set,
the operating mode, working set-point and
fan speed will be the same as at the last unit
switch-off.
SETTING OR CANCELLING A PROGRAMMED
SWITCH-ON (TIMER ON)
Setting a programmed
switch-on
FA
N
M
O
D
E
ON/OFF
SAVE
HEAT COOL
TIMER QUIET SLEEP
LIGHT
X-FAN
E-HEATER
WiFi
TIMER ON
The unit has a timer for programming unit switch-off at
a specified time.
If the TIMER button is pressed while the unit is
switched on, you will access timer programming mode
(the HOUR and OFF icons underneath the time will start
flashing). Press or to set the required switch-off
time. By keeping the TIMER button pressed for about 2
seconds, the time will move quickly on the display and
you will reach the required time faster.
Press TIMER again to confirm the time and activate the
programming. If you want to cancel a programmed
switch-off, just press TIMER again to delete it.
SETTING OR CANCELLING A PROGRAMMED
SWITCH-OFF (TIMER OFF)
Setting a programmed
switch-off
FA
N
M
O
D
E
ON/OFF
SAVE
HEAT COOL
TIMER QUIET SLEEP
LIGHT
X-FAN
E-HEATER
WiFi
TIMER OFF
NOTE
• The time setting gap is from 0.5 to 24 hours.
• When making two operations (TIMER ON and
TIMER OFF), the time gap between them (with
no keys pressed) must not be more than 5
seconds. Otherwise, the programmed ON or
OFF operation will be automatically annulled.
• once a programmed switch-on has been set,
the operating mode, working set-point and
fan speed will be the same as at the last unit
switch-off.