16
4.15 DELETING CURRENT ERRORS (ERROR RESET)
At the function setting page, by touching "Error reset", a choice box will pop up,
where by touching "OK" the error will be reset and by touching "Cancel" the error
will not be reset.
Temp. timer: Off
Emergen. mode: Off
Holiday mode: Off
Preset mode: Off
OK
Reset the error?
Cancel
Error reset: Off
Function (3/4)
This function is used to reset any errors active on the system. This operation must
only be performed after having resolved the alarm condition signalled.
Note: this function can only be performed if the unit is switched off.
4.16 WIFI RESET
This function is used to reset the WiFi connection, eliminating any conflicts.
The procedure for resetting WiFi is the following:
— At the function menu, press the "Reset WiFi" icon;
— Then a box opens where "OK" or "Delete" can be selected;
— Press "OK" to reset WiFi, press "Cancel" to cancel the operation and exit.
4.17 LOADING THE DEFAULT SETTINGS (RESET)
This function is used to load the default values (values pre-set in the factory) for all
functions by resetting the changes made by the user.
Note:
1.
This function can only be performed if the unit is switched off;
2.
This function interacts with the “Temp. timer“, “Clock timer“, “Preset mode“,
“Weekly timer“ and “Weather depend” functions.
4.18 CHILD-LOCK
At the function setting page, by touching "Child Lock", it can be set to "On" or "Off".
When set to "on", the panel returns to the home page and the icon
is shown
in the upper part of the display.
2020-02-20 08:52
0.0°C
0.0°C
+
-
25°C
In this case, the panel is locked and cannot respond to any commands.
To unlock the panel, press the icon
for 6 seconds; however, the "child-lock"
function is still set to "on" and, if no other operations are performed within 30 sec-
onds, the panel locks again.
It is only actually disabled when set to “off”.
4.19 DAYLIGHT SAVING TIME
When it has been activated, it allows to set “Time lag”, “Time lead” and “Transform
time”. The system clock of the control panel will be delayed for some time at the
“Transform time” of last Sunday in March, and will be advanced for some time at the
“Transform time” of last Sunday in October.
“Time lag” is used for last Sunday of March and “Time lead” is for last Sunday of
October.
Daylight Saving Time: On
Daylight Saving Time
Time lag: 1.0 h
Time lead: 1.0 h
Transform time point: 02:00
For example, if March 30 is the last Sunday of this month, when the system clock
goes to March 30, 2:00, the system clock will be lagged automatically for one hour.
That is, the displayed system time will become to be March 30, 3:00.
For example, if October 30 is the last Sunday of this month, when the system clock
goes to October 30, 2:00, the system clock will be advanced automatically for one
hour. That is, the displayed system time will become to be October 30, 1:00. When
there is a timer setting at the “Time lag” period, then this timer setting goes invalid
in this period.
If a timer is set during the "Move Back" period, the timer setting for that period will
not be valid.
