AERMEC gll10m, Инструкция по применению, Страница: 16 / 40

E
nglish
16 IFCLFJ 1102 - 4528570_02
The unit will switch on automatically according to the setting chosen.
Timer duration can be set from a minimum of half an hour (30 minutes) to a maximum of 12 hours.
Up to 9.5 hours, you can set half hour (30 minute) increments; from 10 to 12 hours, 1-hour increments.
1
Point the remote control towards the unit's signal
receiver window.
Press the TIMER OFF button ( ) and set the
time as desired.
• The time setting will change as you press the button
as follows.
Hold the button down to speed through the settings.
• The yellow TIMER indicator light on the unit will light
up.
• The unit generates a beep when it receives the
signal.
• The time setting will count down to show the
remaining time.
1
Notes
• The display indicates that the
unit has been set to reach the
desired room temperature after
6.5 hours.
NOTES ON TIME SETTING AND OPERATION
0.5h 1.0h 1.5h 10h 11h 12h
Select the mode, temperature and fan speed setting
as desired.
• When the temperature is set with TIMER ON, the
display will visualise the temperature for 5 seconds
before returning to the time display.
• If you do not change the setting, the unit will
operate using the most recent settings.
• The latest time setting will be memorised and visualised
on the remote control display the next time you set TIMER
OFF or TIMER ON.
• TIMER ON and TIMER OFF cannot be set together.
Only the most recent TIMER setting will be valid.
• When the ONE-HOUR OFF TIMER is set, the TIMER
OFF and TIMER ON settings are unavailable.
• If the ONE-HOUR OFF TIMER is set when the TIMER
OFF or TIMER ON is activated, the TIMER ON or TIMER
OFF setting will be cancelled.
TIMER ON