15
E
nglish
CARRIAGE
1
2
3
4
5
6
35 Kg
Do NOT wet
Do NOT leave loose packa-
ges during transport.
Stacking: control the packing for
the arrow position to know the
number of machines that can be
stacked.
DO NOT handle the machine alone if its
weight is over 35 Kg
SAFETY SYMBOL
Danger:
Danger:
Danger!!!
Power supply
Movings parts
The units are shipped with standard packing consisting of a
cardboard box with polystyrene foam protection. For special
requirements, on request, a wooden crate may supplement the
standard packing.
PACKING
Do NOT trample
Store the manuals in a dry location to avoid deterioration, as
they must be kept for at least 10 years for any future reference.
All the information in this manual must be carefully read and
understood. Pay particular attention to the operating standar-
ds with “DANGER” or “WARNING” signals as their disrespect
can cause damage to the machine and/or persons or objects.
The unit is designed and constructed to guarantee maximum safety
in its immediate proximity, and to resist weathering. The unit fan is
shielded against accidental contact by a protective guard.
If any malfunctions are not included in this manual, contact
the local Aftersales Service immediately.
The unit should not exceed the temperature limits showed in
the table quoted under the paragraph “WORKING RANGE”.
Wind, earthquakes and other natural phenomena of extraordi-
nary intensity have not been considered.
If the unit must be operated in an aggressive atmosphere or
with aggressive water please consult the factory.
The equipment should be installed so that maintenance and/
or repair services be possible.
The equipment warranty does not cover costs due to lifting
apparatus and platforms or other lifting systems required by the
warranty interventions.
AERMEC S.p.A. declines all responsibility for any damage wha-
tsoever caused by improper use of the machine, and a partial
or superficial acquaintance with the information contained in
this manual.
This manual has 52 pages.
REMARKS
Note: this product contains electric and electronic components, which may not be disposed of as
normal refuse. There are specialised differentiated refuse collection centres for these products.
Electric and electronic equipment must be processed separately, in accordance with applicable
legislation in the country or State of use.
Batteries and accumulators included in equipment must be disposed of separately in accordance
with local legislation.
GUIDELINES FOR THE DISPOSAL OF ELECTRIC AND ELECTRONIC EQUIPMENT