Aerix AERIUS, Руководство пользователя

Страница: 11 / 12

RECALIBRATION OF ACCELEROMETER
If your AERIUS begins to be unstable during flight, drifts heavily in
one direction or troubleshooting doesn’t work please do the following:
1. Turn off Drone and Controller
2. Make sure that all batteries are fully charged
3. Place Drone on flat LEVEL surface
4. Turn Drone on, Turn Controller on and pair (page 4)
5. Keep Throttle (Left Stick) at lowest point
6. Set speed level to HIGH (three beeps, page 7)
7. Push the Throttle (Left Stick) to Lower Left, HOLD
8. Push Control (Right Stick) to Upper Left, HOLD
9. Drone will flash for 1-2 seconds indicating success.
10. Take off and enjoy!
Calibration
LOW VOLTAGE AND DORMANCY
Low Voltage:
When the battery voltage is low, the four LED indicators on AERIUS
will flash.
At this time, please safely land, turn off the AERIUS and charge.
Dormancy Function:
When the AERIUS is powered on it will automatically power off,
when not in use for 7-8 minutes, in order to conserve power.
To power back on, simply turn the power switch off and back on.