Swift’Light – Rigging manual
5
Note: Do not lock the parachute support now.
7. To balance the cockpit in order to fit the wings
you can use the tail cone. So, put the 2 parts
together.
8. Attach the spar. The tips of the spar push
against the inside of the wing and so the angled
end of the spar faces forward. The bolts come
from the back to the front. A plastic washer goes
underneath the wing nut to avoid hanging on the
threaded part of the bolt.
9. Stabilize the cockpit. You can use the tail cone
or the support used to carry the cockpit
underneath the XC container (optional
equipment) or a stick supporting the spar. Don’t
let the cockpit sway side to side as this could
damage the fairing.
10. Put a protection mat where the right wing tip will
come.
