2 / 10
TF6582_A_NOT_INST_PRE_SENSOR_MODBUS
Aereco S.A.
1.1. WARNINGS
PLEASE READ THE FOLLOWING INSTRUCTIONS BEFORE THE
INSTALLATION:
In case of non-compliance with advice and warnings contained
in this manual, the manufacturer can not be considered
responsible for damages to persons or property.
The manual describes how to install, use and maintain correctly
the appliance. The only way to ensure the efficiency and longevity
of the product is to comply with these requirements.
Do not use this appliance for any applications for which it is not
intended.
The system must be installed by experienced contractors, trained
in the specificities of the process and having the necessary skills
in aeraulics and electricity.
The use of gloves to carry on the installation is recommended.
After unpacking the appliance, make sure it is not damaged. Any
functional default must be reported to your reseller.
The use of an electrical appliance implies the following
fundamental rules:
·
Do not touch the appliance with a wet or damp body (hands,
feet, etc.).
·
This appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental capabilities,
or lack of experience and knowledge, unless they have been
given supervision or instruction concerning use of the appliance
by a person responsible for their safety. To avoid any risk, do not
allow them to play with the appliance.
·
The electrical installation and electrical connections must
be carried out by a qualified technician according to the
manufacturer’s instructions and in compliance with the
characteristics listed on the nameplate of the unit.
·
Before carrying out any operation on the appliance, unplug or
disconnect it from the power supply, and ensure it can not be
accidentally restored.
·
Power cable modification or replacement must only be carried
out by qualified personnel or by After-sales Service in order to
avoid any accident.
·
Children being supervised not to play with appliance.
1.
INTRODUCTION
This document presents the installation and maintenance schemes
for Occupancy sensor with Hub 8 SE: exhaust compensation valve
and third-party Modbus system. First, we will focus on the S-PRE/
DAY-NIGHT/T Modbus sensor's connections with Hub 8 SE and
secondly with third party Modbus systems.
2.
DESCRIPTION
2.1. GENERAL INFORMATION
Protocol:
Modbus RTU / through RS485
Baud rate:
9600 bit/s
Modbus implementation class:
basic
Connectors type:
RJ45 with shielded CAT5E cable or better
The detection principle of the S-PRE/Day*-Night**/T Modbus sensor is
based on infrared rays absorption. This method allows a very high fidelity
of response and is independent of any other variable (such as moisture,
dust, etc.).
The connection to the system is made through RJ45 connectors.
The S-PRE/DAY*-NIGHT**/T optical sensor is composed of:
- A Fresnel lens with 31 pairs of facets that concentrate the radiation
emitted by a person on pyroelectric sensors and cut the detection field
into 62 zones
- Specific pyroelectric sensors that collect radiation infrared emitted by a
person and detects mouvements through the factes of the Fresnel lens
the number of movements through the facets of the Fresnel lens
The detector includes a Red LED indicator that displays the detections in
order to inform the users. When luminosity in the room is very low, the
LED is automatically switched off.
COVERAGE PATTERN
Side view
Top view
2,7 m
100°
6 m
Walking direction
