12
installation tYPe (
I
)
setting
value displayed
Through wall (default)
tW
In room - Ducted
Ir
8) run-on tiMer
The unit is equipped with a run-on timer, settable from 1 to 25 minutes. When the external switch is turned
off, the unit continues to run at the intermediate speed for the pre-set period of time.
When the time is expired, the unit returns to the minimum continuous speed.
If the external switch does not stay active for 3 minutes, the run-on is not performed.
In AUTO mode the run-on timer is automatically activated, depending on how long the switch is active, as
follows:
- if the external switch is active for under 3 minutes, the unit does not run-on.
- if the external switch is active for between 3 and 10 minutes, the unit runs on for 5 minutes.
- if the external switch is active for between 10 and 20 minutes, the unit runs on for 10 minutes.
- if the external switch is active for over 20 minutes, the unit runs on for 15 minutes.
The run-on timer can be set in the following way:
- press the MENU button until the “t”
(
t
)
letter is displayed.
- press the b or - to increase or decrease the run-on time between the values shown in the table
below:
run-on tiMer (
t
)
setting (minutes)
value displayed
AUTO (default)
AU
1
01
5
05
10
10
15
15
20
20
25
25
OFF
of
9) huMidistat
The unit is equipped with a humidity sensor that has an adjustable threshold of 65-95%. If the humidistat is
activated, the unit runs at the intermediate speed and continues to run for a fixed time of 5 minutes after the
humidity level drops below the selected threshold.
In AUTO mode, the humidistat, which records the humidity levels, triggers if there is a steep variation of the
humidity and if humidity level is over 65%.
The humidistat can be set in the following way:
- press the MENU button until the “h”
(
h
)
letter is displayed.
- press the b or - to increase or decrease the humidity threshold between the values shown in the
table below:
The installation type can be set in the following way:
- press the MENU button until the “I”
(
I
)
letter is displayed.
- press the b or - to chose the type of installation as follows:
