AERA EVO-10C, Руководство пользователя

Страница: 12 / 78

12
CHAPTER 2
2.1 Unit insulation
The outside and exhaust air ductwork should be insulated sufficiently.
Frost-proof condensate drainage must be installed, perhaps with a heater.
If the unit is to be used in outdoor, make sure that the necessary equipment is
installed. (weather roof and outdoor spigot, optional)
2.2 Installation
EVO-C has easily adjustable stays. (Fig. 2) First of all, make sure that there is
enough space for the device servicing. Therefore, the device must be assembled
after the dimensions have been identified.
ATTENTION
Make sure that the device is placed on a flat surface
before any assembly work.
2.3 Condensation outlet
Condensation water can occur during the heating and cooling period. The
condensation water pan is made of stainless steel.
The suitable length of the condensation pipe (long or short pipe) must be used for
the service direction.
Condensation outlet pipes should be insulated against freezing.
(Fig. 2)
(Fig. 3)