AER pocket tools dual mix, Руководство пользователя

Страница: 4 / 12

4
3. Controls and
Connections
2. Safety Instructions
The following guidelines shall help minimize the risk of
injury through fire or electric shock.
1. Carefully read these safety notes before you use the
device!
2. Keep these safety notes in a safe place.
3. Pay attention to all warnings, instructions and addi-
tional texts on the unit.
4. Do not install or use your device in close proximity to
water or if you are wet yourself.
5. Use your device in a safe place where nobody can
step on cables or trip over and damage them.
6. Always pull the mains plug before cleaning your de-
vice. Use only a dry cloth for cleaning. Avoid the use
of detergents and do not let any liquids seep into the
unit.
7. Never install your device close to units with strong
electromagnetic fields such as large mains transfor
-
mers, revolving machines, neon illumination etc. Do
not lay signal cables parallel to power current cables.
8. There are no user-serviceable components inside
the unit. To avoid the risk of an electric shock, the unit
must not be opened. All maintenance, adjustment and
repair works should be carried out by qualified staff
only. Any unauthorized tampering will void the 2-year
warranty.
9. In keeping with the EMV regulations screened cables
with correctly fitted connectors must be used for all si
-
gnal connections.
10. Always use an earthed power supply with the cor-
rect mains voltage. If you are in doubt about the power
outlets ground, have it checked by a qualified techni -
cian.
11. Cable up your device only when it is powered off.
Top side
gain input level control
clip overload indicator
line/mic signal source selector switch (combo socket):
line (only via 6.3 mm jackplug) for instruments
(pickup) and other line level sources
mic (only via XLR-connector) for microphones
high treble control
low bass control
efx 4-preset multi-effects unit
level level control internal effect
pan effect signal distribution control
select effect select button with led-indicators
aux in stereo-input for additional signal sources
level stereo input level control
master master level control
Rear side
dc 24 V power supply connector socket (24 Volt DC)
24V phantom power
ch. 1
24V phantom power switch channel 1
ch. 2 24V phantom power switch channel 2
line out signal output, 6.3 mm mono jack socket
headphones stereo-headphones socket
DI out signal output, symmetrical, XLR-socket
DI level DI out signal level control
Front side
channel 1 signal input – combo socket for 6.3 mm mono
jackplug and XLR connector
channel 2 signal input – combo socket for 6.3 mm mono
jackplug and XLR connector
aux-in stereo input for additional signal sources
(e.g. CD-player), RCA-sockets
(white = left channel, red = right channel),
parallel: 3.5 mm stereo jack socket
power on/off-status indicator
channel 1
clip clip
line/mic
channel 2
channel 1 channel 2
efx aux in
aux in
gain gain
high high pan
select
power
24V phantom power
line out
out
level
head
phones
foot
switch
DI
ch.2
dc 24 V
1 = gnd
2 = pos
3 = neg
ch.1
master
low low
level level
line/mic
pocket tools
dual mix