Channel 2:
Input
XLR combination with a socket for a 6.3 mm jack plug and XLR male socket
Line/Mic
switch to adjust input sensitivity
Line:
sources with line level, instruments with active preamplifiers
and magnetic sound pick-ups,
Mic:
symmetrical microphone input
with 30 V phantom source
Clip
overload indicator
Gain
input level control
Bass
tone control for bass
Treble
tone control for treble
Eff. Pan
panorama control to distribute the effects between the channels
Select
switch for two effect programmes (reverberation, reverberation/delay)
Return
level control for the internal effect
Power
power indicator lamp
Master
level control for the overall volume
Low batt.
low charge indicator lamp
Charge
charge indicator lamp
48V on/off
48V phantom power on/off
Aux–Return
level control for the Aux–Input (e.g. CD–player)
Rear
(from left to right):
Aux–In
input for CD and tape
Phones
headphone output
Tuner
output for a tuner after the master control
Line-out
preamplifier output after the master control
DI-out
XLR output before the master control
Send
output for an external effect device
Return
input for an external effect device or another signal source, for example
CD–player
Footswitch
connection for a double foot switch with which the effects can be
switched on and off.
12V/DC only
connection for an external 12V/DC–battery, not suitable for
a connection to a board–net.
DC on/off
On/Off–switch for an external battery–connection.
Power on/off
combined mains switch with a mains socket and a fuse-
holder (1 A slowblow) for both operating–modes
Compact
mobile
3
A
Part of the action
