Basscube
C
-11-
Analog Signal
Processor:
limiter, displacement filter
Power Amp:
Powerconsumption:
220-240 V / 50-60Hz /
400 VA (110V / 50-60Hz)
rating:
bass
340 watts / 8 ohms rms
tweeter 360 watts / 8 ohms rms
freq.resp: 20 Hz - 30kHz
fuse:
6.13 A slow
Speaker:
bass:
12” B&C longcoil di-cast chassis
(96 dB 1w/1m, freq.range 38 Hz-
2 kHz)
tweeter:
B&C cone tweeter (103 dB 1w/1m,
freq.range 5 -16.5 kHz)
X-over:
active two-way, 4 kHz / 24 dB/
oct., LR-filter
Cabinet:
10.71” 3(18 mm) birch plywood
Dimension:
15.75” (400 mm) wide
15.75” (400 mm) high
14.33” (364 mm) deep
Finish:
waterbased acrylic, black spatter finish
Weight:
53.3 lbs. (25 kg)
0dB/V ~ 1V
Specifications and appearance subject to change without notice
C
Audio Electric Research GmbH&Co. KG
Christine-Englerth-Straße 30
D - 45665 Recklinghausen
Telefon: +49 (0)2361 - 891789 / -90
Telefax: +49 (0)2361 - 891798 / -99
5. Technical Data
Inputs:
Ch1: XLR-Combi
line:
unbalanced, 1 MEG, stereo,
(ring: 9V/15V phantom power)
piezo: unbalanced, >10 MEG, Bultra
high impedance inputstage
mic:
balanced, 1 k, 48V phantom
power
Ch2:
line:
unbalanced, 1 MEG
piezo: unbalanced, >10 MEG, Bultra
high impedance inputstage
Ch3: XLR-Combi
line:
unbalanced, 1 MEG, stereo
mic:
balanced, 1 k, 48V phantom
power
Return:
effect-return, mono 0dBV/22k
Aux-In:
cinch, stereo 0dBV/22k
Outputs:
DI:
balanced, adjustable -20dBV to -
10dBV (1=gnd, 2=pos, 3=neg)
Line:
unbalanced, 0dBV, pre master
Active Sub out:
unbalanced, 0dBV, post master
Tuner: unbalanced,
-10dBV
Headphones: 2 x mono, 2 x 320 mW at min. 4 ohms
Footswitch: mono
Send: effect-send
0dbV
ext. speaker passive:
min 8 ohms
eq:
ch1/2:
bass:
±10 dB/ 80 Hz
middle: ±10 dB/ 200 Hz - 1 kHz
treble:
±10 dB/ 10 kHz
colour: -3 dBV/ 700 Hz and +
10 dBV/ 10 kHz
ch3:
bass:
±06 dB/ 100 Hz
treble:
±10 dB/ 10 kHz
Notch:
cut:
-14 dBV/ 30-400 Hz
Compressor:
threshold: -40 dBV - 0 dBV
ratio:
1:1 to 20:1
