9
5.4 Rear Side Features
1) gnd lift
The
ground lift
switch separates the earth conductor
from the signal ground and suppresses humming.
2) headphones
This output enables you to connect
stereo headpho-
nes
and switches the loudspeaker over to mute. The
device is a quality stereo headset amplifier which
outputs 2 x 50 mW and 32 Ohm.
!!!
Warning: Only use
headphones with stereo
jack plugs in this output
socket!!!
3) line out
The
line out
provides the pre-amp signal for conduc-
tion to other appliances with 0 dbV.
4) sub out
This socket provides a frequency-adjusted output sig-
nal for operating an active
subwoofer
.
5) footswitch
The
footswitch
socket enables the connection of a
stereo footswitch (on/off switch) which can be used
to switch the amplifier to
mute
or to switch the
ef-
fect loop
on or off. The switches are:
TIP = mute
,
RING = effect loop
.
6) send
This socket connects the
amp three
to the input of
an external effect device. Together with
return
,
send
forms an effect loop path. The effect can be switched
on or off via a footswitch.
7) return
Being part of the effect loop path,
return
represents
the input for an external effect device (from the out-
put of the effect device).
Return
on it’s own may also
be used as quasi auxiliary signal input (-10 dbV).
8 and 9) insert pre eq / insert post eq
Insert pre/post eq
are two more effect loop paths to
loop additional external effects (filter, compressor
etc.) inzo the signal path, either
pre
or
post
equali-
zation.
10 and 12) aux in / aux level
The
aux in
is an additional stereo-input for connec-
tion of external signal sources (e.g. CD-player). With
the
aux level
control you adjust the signal strength
of the
aux
signal.
11) tuner
Output socket (-6 dbV) with
pre master
signal to con-
nect an external tuner to the
amp three
.
13, 14 and 15) DI
The
DI-out
(XLR socket) delivers a symmetrical pre-
amp signal
pre master
. The
DI-Level
control adjusts
the signal output level and with the
DI pre/post
switch you can choose between pre- and post-equa-
lizer signal.
Power on
Combined mains switch with
mains socket and integrated
fuse holder to switch your
amp three
on and off.
P.S.: For questions or suggestions contact us:
[email protected]
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
AT T E N T I O N
RISQUE DE CHOC ELECTRIQUE
NE PAS OUVRIR
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
AT T E N T I O N
RISQUE DE CHOC ELECTRIQUE
NE PAS OUVRIR
2
3
4
6
8
12
9
7
5
15
13
14
11
10
1
