AEQ BC-2500 Скачать руководство пользователя страница 29

Страница: 29 / 56

AEQ BC-2500

Radio Broadcast Mixing Desk

5.7.1.3. Command, Intercom, Oscillator and Time-signal administration Block

This block administers the command sends and intercom circuit returns, the oscillator

circuit sends and the reception of time signal tones.

The command circuit signals are generated by the microphone

(18) MICRO TALKBACK

that is activated by the push-button switch (

20) TALKBACK

and can be directed to all or any of

the following outputs:

- Master 1 activating the switch

(8) MASTER 1

- Master 2, activating the switch

(9) MASTER 2

- Auxiliary 1, activating the switch

(10) AUX.1

- Auxiliary 2, activating the switch

(11) AUX.2

- Telephone 1, activating the switch

(12) PHONE 1

- Telephone 2, activating the switch

(13) PHONE 2

- Studio monitor activating the switch

(14) STUDIO

- Principal headphones activating the switch

(15) H/PHONES 1

- Secondary headphones activating the switch

(16) H/PHONES 2

- Intercom output activating the switch

(17) INTERCOM OUTPUT

Note:

To avoid the effects of microphone feedback to the control loudspeakers, the monitor signal

level is attenuated when the control microphone is activated.

The intercom circuit input is activated by the switch

(21) INTERCOM INPUT

. When an

audio signal is received it is heard in the PFL monitors.

The audio signals generated by the oscillator circuit are activated with switch

(1) ON/OFF

and can be directed to all or any of the following outputs:

- Master 1, activating the switch

(2) MASTER 1

- Master 2, activating the switch

(3) MASTER 2

- Auxiliary 1, activating the switch

(4) AUX.1

- Auxiliary 2, activating the switch

(5) AUX.2

- Telephone 1, activating the switch

(6) PHONE 1

- Telephone 2, activating the switch

(7) PHONE 2

Note:

The output level is adjusted with the fader corresponding to the output that is activated.

This module has an input for the introduction of the output or outputs previously

programmed by P.D.P. (programmable bridges) of the audio signals corresponding to the time
signal tones. This input is activated with the switch

(19) TIME TOP’S.

Содержание BC-2500

























































Результаты поиска

Содержание BC-2500

Отзывы:

Похожие инструкции для BC-2500

Бренды по названию

Популярные бренды

AEQ BC-2500, Руководство пользователя

Результаты поиска

Содержание BC-2500

Отзывы:

Похожие инструкции для BC-2500

Бренды по названию

Популярные бренды