Aeotec Z-Pi 7, Руководство пользователя, Страница: 2 / 7

Please read this and other device guides carefully. Failure to follow the recommendations set forth by Aeotec Limited may
be dangerous or cause a violation of the law. The manufacturer, importer, distributor, and/or reseller will not be held
responsible for any loss or damage resulting from not following any instructions in this guide or other materials.
Keep product away from open flames and extreme heat. Avoid direct sunlight or heat exposure.
Z-Pi 7 is intended for indoor use in dry locations only. Do not use in damp, moist, and/or wet locations.
Quick start
The following will step you through using Z-Pi 7 when it is attached to a host controller (Raspberry Pi or Orange Pi Zero) as a
primary controller.
Please make sure the host controller is pre-installed; this includes any drivers that the corresponding OS may need.
1. Connect Z-Pi 7 to a host controller. The following diagrams show how to install the Z-Pi on each system.
1.1. Install Z-Pi 7 on Raspberry Pi
OS: Linux - Raspian "Stretch" or higher:
The Z-Pi7 uses the same port as Bluetooth. To use Z-Pi 7, you must deactivate Bluetooth.