Aeotec Recessed Door Sensor 7, Руководство пользователя

Страница: 7 / 11

AEOTEC Engineering Specification
Page 3
Security Class Non-Security, S0, S2 Unauthenticated, and S2 Authenticated
SmartStart Compatible Support. After powering on, SmartStart is auto activ ated if it ’s out of the Z-Wave network.
Over The Air (OTA) Support. Firmware can be updated via RF.
Multi Channel Device No
Association Support. Refer to Section 4.7 Association Group Info.
Factory Reset Support. Refer to Section 3.6 How to factory reset.
Power-down Memory Support. All command settings will stay unchanged even power down.
Timed battery report Support. Refer to Configuration Parameter 101.
Low battery warning Support. Refer to Configuration Parameter 90.
Sensor State Report Support. When Magnet is away or near, send out notification via Group 1 .
Control other device Support. When Magnet is away or near, control other Z -Wave device directly via Group 2.