Setting
Description
0
Send Nothing
1
Send Basic Set CC
Parameter 82: To set which notification would be sent to the associated nodes in association group 4
To set which notification would be sent to the associated nodes in association Group 4 when using the external switch 2 to switch the loads.
Size: 1 Byte, Default Value: 1
Setting
Description
0
Send Nothing
1
Send Basic Set CC
Parameter 83: Configure the state of LED when it is in 3 modes
Configure the state of LED when it is in 3 modes (Energy mode, Momentary indicate mode, Night light mode)
Size: 1 Byte, Default Value: 0
Setting
Description
0
Energy mode. The LED will follow the status (on/off).
1
Momentary indicate mode. When the state of Switchu2019s load changed, the LED will follow the status (on/off)
of its load, but the LED will turn off after 5 seconds if there is no any switch action.
2
Night light mode. The LED will remain ON state.
Parameter 84: Set the ON/OFF time of the LED when it is in Night light mode.
Set the ON/OFF time of the LED when it is in Night light mode.
Size: 1 Byte, Default Value: 301991936
Setting
Description
0 - 60
The minute time of OFF
256 - 316
The hour time of OFF
65536 - 65596
The minute time of ON
16777216 - 16777276
The hour time of ON
Parameter 86: Set appointment 1
Set the ON time of output load.
Size: 4 Byte, Default Value: 8327680
Setting
Description
0 - 60
The minute value of ON time
256 - 316
The hour value of ON time
65536 - 65543
The day value (Mon to Sun)
16777215
Disable the setting.
16777216
Enable the setting.
Parameter 87: Set appointment 2
Set the OFF time of output load.
Size: 4 Byte, Default Value: 8327680
Setting
Description
0 - 60
The minute value of ON time
256 - 316
The hour value of ON time
65536 - 65543
The day value (Mon to Sun)
16777215
Disable the setting.
16777216
Enable the setting.
Parameter 120: Configure the external switch mode for S1.
Configure the external switch mode for S1.
Size: 1 Byte, Default Value: 0
