1.
2.
5.
6.
3.
4.
Put all the parts back in reverse order.
Carbon Brush
Remove the retaining screws on
front cap by cross screwdriver in
arrow direction, and open the front
cap.
Wall-mounting Bracket
Fix the retaining screws in broken line
showed in the picture; examine the strength
and stability after works done.
The wall which you want to attach the bracket
to must be a solid wall which could bear
weight loading!
Remove these three screws which
fixing the motor bracket one by
one.
Put the new brushes in, and tighten the
brass clip with nipper pliers.
Press the clip down on the connectors of
the wires to motor, unplug the wires and
remove the front cap.
Lift the little iron panel up with flathead
screwdriver, open the brass clip which
holding the motor wire to remove the old
carbon brushes.
Twist the little iron to a certain angle to
fix the carbon brush brass rear cap.
Groomers’ Third Arm
1.
2.
Dryer Stand
1.
2.
Fix the nozzle with the metal clamp.
※
The power supply must be cut off before changing carbon brushes.
Slide the latch to fix the
dryer in showed direction.
Slide the dryer into position
of the bracket in arrow
direction.
