AENO ARC0004S, Быстрый старт

Страница: 14 / 162

aeno.com/documents 14
5. Remove and rinse the side brush and cloth overlay with warm water.
6. Remove hair and debris from the brush roll with the care brush supplied
with the vacuum cleaner.
Dry the component parts away from heaters. Make sure all the parts are
completely dry before reinstalling.
Troubleshooting
1. The vacuum cleaner is not charging – the charging base is not plugged in; dirty
contacts on base and/or cleaner container. You should check the power cable
connection to the base and the power supply, and wipe the pins with a soft, dry cloth.
2. The vacuum cleaner returns to the base to recharge before the end of the
cleaning
– battery charge is less than 20 %. The vacuum cleaner should be charged.
3. The suction power has decreased – the dust tank is full; the filter and/or roller
brush is clogged. The dust tank, filter and/or roller brush should be cleaned.
WARNING! If none of the possible solutions solves your problem, please
contact your local supplier or the service center for support. Do not
disassemble or attempt to repair the device yourself.
These symbols indicate that you must follow the Waste Electrical and Electronic
Equipment (WEEE) and Waste Battery and Battery Regulations when disposing of
the device, its batteries and accumulators, and its electrical and electronic accessories.
According to the rules, this equipment must be disposed of separately at the end of
its service life. Do not dispose of the device, its batteries and accumulators, or its
electrical and electronic accessories together with unsorted municipal waste, as this
will harm the environment. To dispose this equipment, it must be returned to the
point of sale or turned in to a local recycling facility. You should contact your local
household waste disposal service for details.
ASBISc reserves the right to modify the device and to make changes and revisions to
this document without prior notice to users.
The warranty period and service life is 2 years from the date of purchase of the product.
Manufacturer's information: ASBISc Enterprises PLC, Iapetou, 1, Agios Athanasios, 4101,
Limassol, Cyprus (Cyprus). Made in China.
Up-to-date information and a detailed description of the device, as well as connection instructions, certificates,
information about companies that accept quality claims and warranties, are available for download at
aeno.com/documents . All trademarks and brand names are the property of their respective owners.