Simple Logger
®
Models L320 / L410 / L430
3
**
IMPORTANT NOTICE BEFORE OPERATING
**
A scale must be set prior to saving
a downloaded DC Logger file
for the logger to function correctly
To create scales with the Logger connected:
The first time a DC logger is used with a fresh install of the Simple
Logger software a scale must be set for each different DC logger
model. Once a scale is set for a specific model, the software will
default to this scale each time that model is connected. To set a
scale for the model in use, connect the logger and a Scale menu
will appear. Click on Scale and the scaling window for the model
used will appear. From the scaling window you may set a custom
scale or open a predefined scale from the File-Open menu. The
predefined scale is in the directory for the Simple Logger software.
To create scales without the Logger connected:
Go to Scaling from the File menu and select the range for the model
used. From the scaling window you may create a custom scale and
save it using the File-Save Command. The predefined scales are
saved in the directory for the Simple Logger software.
A scale may be set prior to or after downloading,
but before saving.
Содержание Simple Logger L320
Страница 1: ...SIMPLE LOGGER DC MODULE L320 L410 L430 E N G L I S H User Manual...
Страница 26: ...24 Simple Logger Models L320 L410 L430 Notes...
Страница 27: ......
