AEMC Model 1950, Быстрый старт

Страница: 5 / 12

1. QUICK START STEPS
The following steps assume default settings:
1. Insert charged batteries in the camera (if not
already installed).
2. Insert the micro SD memory card into its slot.
3. Open the flap protecting the lenses.
4. Press the ON/OFF key:
- If you have installed new batteries,
configure Battery Manager (see instructions
in the User Manual § 1.2.1).
- If prompted, enter the date and time.
5. Aim at the target. An IR image (thermogram)
of the target appears in the display.
6. To save the thermogram and its associated
visible light image, press F2 to freeze the
image and then press F3. The images are
saved in a file in the micro SD card.
7. You can recall and view saved images on the
camera, or transfer images to a computer
(using the USB cable or a micro SD card
reader) for analysis and report generation with
the provided CAmReport software.
NOTE: For more information, refer to the User
Manual on the USB drive.
5