background image

Limited Warranty 

The  Megohmmeters  Model  5000N,  5100  and  5110  are  warranted  to  the 

owner  for  a  period  of 

2

  year

s

  from  the  date  of  original  purchase 

against  defects  in  manufacture.  This  limited  warranty  is  given  by 

AEMC

®

  Instruments,  not  by  the  distributor  from  whom  it  was

  pur-

 

chased.  This  warranty is void if the unit has been tampered with, abused 

or if the defect is related to service not performed by AEMC

®

 Instruments.

  

For full and detailed warranty coverage, please read the Warranty 
Coverage Information, which is attached to the Warranty Registration 
Card (if enclosed) or is available at www.aemc.com. Please keep the 
Warranty Coverage Information with your records. 

What AEMC

®

 Instruments will do: 

If  a  malfunction  occurs  within  the 

warranty

  period,  you  may  return  the 

instrument  to  us  for  repair,  provided  we  have  your  warranty  registration 

information  on  file  or  a  proof  of  purchase.  AEMC

®

  Instruments  will,  at  its 

option, repair or replace the faulty material. 

REGISTER ONLINE AT: 

www.aemc.com

 

Warranty Repairs 

What you must do to return an Instrument for Warranty Repair:

  

First, request a Customer Service Authorization number (CSA#) by phone or 

by  fax  from  our  Service  Department  (see  address  below),  then  return  the 

instrument along with the signed CSA Form. Please write the CSA number 

on the outside of the shipping container. Return the instrument, postage or 

shipment pre-paid to: 
 

Chauvin Arnoux

®

, Inc. d.b.a. AEMC

®

 Instruments 

Service Department  

15 Faraday Drive • Dover, NH 03820 USA 
Tel: 

(800) 945-2362  (Ext. 360) 

(603) 749-6434  (Ext. 360) 

Fax: 

(603) 742-2346 or (603) 749-6309 

Caution:

  To  protect  yourself  against  in-transit  loss,  we  recommend  you 

insure your returned material. 

Note: You must obtain a CSA# before returning any instrument. 

Содержание 5000N












































Отзывы: