background image

Clamp-on Meter Model 566 

21

 

Limited Warranty

The Model 566 is warranted to the owner for a period of two 

years from the date of original purchase against defects 

in manufacture. This limited warranty is given by AEMC

®

 

Instruments, not by the distributor from whom it was purchased. 

This warranty is void if the unit has been tampered with, abused 

or if the defect is related to service not performed by AEMC

®

 

Instruments. 

For full warranty coverage detail and 

registration, go to www.aemc.com

What AEMC

®

 Instruments will do: 

If a malfunction occurs 

within the warranty period, you may return the instrument to us 

for repair, provided we have your warranty registration informa-

tion on file or a proof of purchase. AEMC

®

 Instruments will, at its 

option, repair or replace the faulty material.

REGISTER ONLINE AT:

 www.aemc.com

Warranty Repairs

What you must do to return an Instrument for Warranty 

Repair: 

First, request a Customer Service Authorization Number (CSA#) 

by phone or by fax from our Service Department (see address 

below), then return the instrument along with the signed CSA 

Form. Please write the CSA# on the outside of the shipping con-

tainer. Return the instrument, postage or shipment pre-paid to:
  Chauvin Arnoux

®

, Inc. d.b.a. AEMC

®

 Instruments

  Service Department 

  15 Faraday Drive • Dover, NH 03820 USA

  Tel:  (800) 945-2362  (Ext. 360)

   

(603) 749-6434  (Ext. 360)

  Fax:  (603) 742-2346 or (603) 749-6309

  E-mail: [email protected]

Caution:

 To protect yourself against in-transit loss, we recom-

mend you insure your returned material.

NOTE: All customers must obtain a CSA# before returning 

any instrument.

Содержание 2139.83





























Отзывы: