Simple Logger
®
AmpFlex
™
Current Probes
8
SOFTWARE
This model requires software version 6.11 or higher.
MINIMUM COMPUTER REQUIREMENTS
Processor:
486 or higher
RAM Storage
: 8MB
Hard Drive Space:
8MB for application, approx. 400K for each stored file
Environment:
Windows
®
98, 2000, ME, NT and XP
Port Access:
(1) 9-pin serial port and (1) parallel port for printer support
INSTALLATION
Your Simple Logger
®
software is supplied on a CD-ROM. To install the
program, perform the following steps:
Auto Run Disabled:
If Auto Run is disabled, insert the Simple Logger
®
CD into the CD-ROM drive, then select
Run
from the
Start Menu
. In the
dialog box that appears, type:
D:\setup
, then click the
OK
button.
NOTE:
In this example, your CD-ROM drive is assumed to be drive letter
D. If this is not the case, substitute the appropriate drive letter.
Auto Run Enabled:
If Auto Run is enabled, insert the Simple Logger
®
CD into the CD-ROM drive and follow the on-screen prompts to
complete the setup.
•
Select Simple Logger 6.11
•
Select Acrobat Reader to install Acrobat Reader version 5.0
•
Select Explore CD to view the User Guide, Simple Logger
®
Catalog or
user specific manuals in PDF format.
To view the documents included on the CD-ROM, you must have
Acrobat Reader installed on your machine. If you do not have it installed,
you can install it from the Simple Logger
®
Software CD-ROM.
Installing Acrobat Reader:
Select
Run
from the
Start Menu
. In the
dialog box that appears, type:
D:\Acrobat\setup
, then click
OK
.
NOTE:
In this example, your CD-ROM drive is assumed to be drive letter
D. If this is not the case, substitute the appropriate drive letter.
